Stainless steel filter mesh material and things to pay attention to during production

The Stainless steel filter mesh filter material and the things used in production are what many people want to understand and are also very useful. The manufacturer of stainless steel wire mesh is now more famous for more than 30 years of experience in maishi manufacturers, guaranteeing the quality of products and after-sales service.

For Stainless steel filter meshs, we are more professional.

1. First check the machine and then start.

2. Clean the workbench before starting the press.

3. After the punch is started, one person carries out the feeding and rushing operations, and others cannot help.

4. If you find that the press is abnormal, turn off the power and check it immediately.

5. The punching force must be verified and overload operation is strictly prohibited.

6. When single punching, hands and feet are not allowed to be placed on the hand

and foot brakes to prevent accidents.

7. When installing and removing the mold, the power must be turned off first.

8. Before the blade is worn until the burr exceeds the standard, the knife edge should be repaired in time.

9. When removing the mold, it must be done in the mold clamping state.

It is also worth reminding that we need to stop in time after the work is completed, and it is necessary to turn off the power, and what needs to be done is to organize the work.